PRODUCTS

HEAT EXCHANGERS

Heat exchangers we meet every operational specification, from the very simple to the most complex. Nanaumi also supplies reconditioned plate heat exchanger, these second hand units undergo through an exhaustive reconditioning process with oem standard.

The reconditioning services are carried out using most advanced equipment and technology thereby diminishing presence of any deformation crack or holes in the plates. Every plate pack is checked thoroughly and pressure tested to the required level thereby giving the customer a fault-free machine.

OUR TECHNICAL DEPARTMENT CAN ALSO PROVIDE A COMPLETE COOLING / HEATING SOLUTION BY DESIGNING A PHE AS PER YOUR REQUIREMENT. AT NANAUMI WE HOLD A LARGE STOCK OF NEW GASKETS FOR ALL TYPES OF PHE MAKES ALFA LAVAL, HISAKA, APV, SONDEX, TANTER ETC…

Seperators

SEPERATORS

Having a stock of ready to deliver, machines we are always in position to offer all makes & Types Of Oil separators required by customer. Every Reconditioned Machine produced at Nanaumi goes through a rigorous running test.

To ensure that there is uniformity in quality there are standard guidelines laid down for the reconditioning process. Our Workshop is equipped with latest Re-conditioning Equipment as per OEM Standards.

During Reconditioning most of the moving parts are discarded and replaced with new. The Bowl Assembly undergoes rigorous checks and only the correct bowl is then sent for balancing. The balancing operation is carried out as per OEM Standards.

  • The frame is coated with epoxy red oxide, nitro cellulose putty & there after painted with 2 layers epoxy paint.
  • The frame & bowl assembly is then assembled using all new spare parts such as vertical & horizontal assembly, new pump, electric motor etc.
  • Once the assembly is completed the machine is put on the test bed where it undergoes testing on oil. The Machine is checked for vibration /balancing /operation and de-sludging. Motor amperage / parameters is noted to ensure separator is running smoothly.
  • Once the quality is approved test certificates are issued, machine is then dismantled, thoroughly cleaned and packed.

FRESHWATER GENERATORS

We supply used evaporator plates duly cleaned, checked & pressure tested along with new gaskets. Other items such as brine and air eductor, salinometer, flow meter etc can also be arranged from reliable source.

We can deliver channel plates and plate gaskets for the complete range of Alfa Laval coolers and fresh water generators. We also offer complete units of all types, duly re-conditioned & tested.

Fresh Water Generator
MOATTI FILTERS

MOATTI FILTERS

We supply reliable spares for Moatti Filters which will be cost effective as well as give desirable results. Spares used in auto clean filters for Alfa Laval of various models can be supplied.

We supply wide range of replacement parts for Moatti filters, such as primary spare parts, filter discs in various sizes and filtration grades, seals, O-rings and mechanical parts. We also offer complete units of all types, duly re-conditioned & tested.

IMO PUMPS & MACHINERY

We build & supply customized modules or skids for various applications. The spectrum of modules supplied worldwide is:

  • Customized Engineering to suit the specific application & process.
  • Newly developed PLC based system for auto control & internet based connectivity for remote monitoring and supervision.
  • Modules manufactured & supplied for HFO/ DO/LO purification system, HFO/ LFO changeover unit, central cooling system for power plants & industrial separation system for various industrial fluids, food &chemical applications. We deliver the highest quality standard with an emphasis on complete customer satisfaction.
IMO PUMPS & MACHINERY
SPARE PARTS

SPARE PARTS

Nanaumi Pte Ltd is one of the largest supplier of new parts for all types of separators make – ALFA LAVAL/ SAMGONG/ MITSUBISHI/WESTFALIA. Our spectrum of spare parts include all mechanical parts, electronic items, bearings, seal rings, tools, gaskets etc.

We house a stock of more than 500,000 new parts and we are continuously increasing our inventory to meet the demands of our customers.

In order to meet increasing demand of spare parts our inventory is being updated regularly. So that we can provide prompt and economical solutions to the customer.

  • COST : At NANAUMI we provide most economical spare parts which are competitive in pricing. We continue to maintain quality of the spares with best price range.
  • QUALITY : An organized team for quality assurance is dedicated to maintain the standards at par with OEM’s. Our spare parts run through high quality inspection to ensure we supply perfectly compatible parts with assured durability.

We have very efficient system of providing response to customer’s enquiry at short notice. Our World Wide connections make it possible to dispatch the spare parts to any location and to any country

ACCESSORIES

All Type of Accessories are readily available which are supplied with The Reconditioned Machine and also available separately.

  • Separator Special Tools
  • Stainless Steel Hoses
  • Gravity Discs
  • Anti Vibration Mountings
  • Ele. Heaters & Plate Type Heat Packs
  • Solenoid Valve Blocks For Water & Air
  • High & Low Pressure Switches
  • Starter Panels
  • Epc 30, 41, 400 & Epc 50 / Epc 60
  • Water Transducers Wt 100 / Wt 200
  • Visco Chief Vcu 160 & Evt 10
  • Imo Pumps
  • Three Way Valves
Accessories
Reconditioned Machines

RECONDITIONED MACHINE

Having a stock of ready to deliver, machines we are always in position to offer all makes & Types Of Oil separators required by customer. Every Reconditioned Machine produced at Nanaumi goes through a rigorous running test.

To ensure that there is uniformity in quality there are standard guidelines laid down for the reconditioning process. Our Workshop is equipped with latest Re-conditioning Equipment as per OEM Standards.

During Reconditioning most of the moving parts are discarded and replaced with new. The Bowl Assembly undergoes rigorous checks and only the correct bowl is then sent for balancing. The balancing operation is carried out as per OEM Standards.

  • The frame is coated with epoxy red oxide, nitro cellulose putty & there after painted with 2 layers epoxy paint.
  • The frame & bowl assembly is then assembled using all new spare parts such as vertical & horizontal assembly, new pump, electric motor etc.
  • Once the assembly is completed the machine is put on the test bed where it undergoes testing on oil. The Machine is checked for vibration /balancing /operation and de-sludging. Motor amperage / parameters is noted to ensure separator is running smoothly.
  • Once the quality is approved test certificates are issued, machine is then dismantled, thoroughly cleaned and packed.

Request A Quote

In order to ensure we provide you with the most accurate quote, please submit as much information as you can regarding your application. We will review the information submitted and get back to you with a quote as soon as possible.